Search results for " cathode"
showing 10 items of 26 documents
Enhanced Electrochemical Properties of Na0.67MnO2 Cathode for Na-Ion Batteries Prepared with Novel Tetrabutylammonium Alginate Binder
2022
This research was funded by the State Education Development Agency, the Republic of Latvia, grant number 1.1.1.2/VIAA/1/16/166, "Advanced Materials for Sodium-Ion Batteries". Institute of Solid-State Physics, University of Latvia as the Centre of Excellence has received funding from the European Union's Horizon 2020 Framework Program H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART2.
Monofunctional pyrenes at carbon nanotube electrodes for direct electron transfer H2O2 reduction with HRP and HRP-bacterial nanocellulose
2021
Abstract The non-covalent modification of carbon nanotube electrodes with pyrene derivatives is a versatile approach to enhance the electrical wiring of enzymes for biosensors and biofuel cells. We report here a comparative study of five pyrene derivatives adsorbed at multi-walled carbon nanotube electrodes to shed light on their ability to promote direct electron transfer with horseradish peroxidase (HRP) for H2O2 reduction. In all cases, pyrene-modified electrodes enhanced catalytic reduction compared to the unmodified electrodes. The pyrene N-hydroxysuccinimide (NHS) ester derivative provided access to the highest catalytic current of 1.4 mA cm−2 at 6 mmol L−1 H2O2, high onset potential …
The Membrane-Less Microbial Fuel Cell (ML-MFC) with Ni-Co and Cu-B Cathode Powered by the Process Wastewater from Yeast Production
2020
Research related to measurements of electricity production was combined with parallel wastewater parameter reduction in a membrane-less microbial fuel cell (ML-MFC) fed with industry process wastewater (from a yeast factory). Electrodes with Ni–Co and Cu–B catalysts were used as cathodes. A carbon electrode (carbon cloth) was used as a reference due to its widespread use. It was demonstrated that all analyzed electrodes could be employed as cathodes in ML-MFC fed with process wastewater from yeast production. Electricity measurements during ML-MFC operations indicated that power (6.19 mW) and current density (0.38 mA·cm−2) were the highest for Ni–Co electrodes. In addition, during the explo…
ELECTROCHEMICAL CONVERSION OF CARBON DIOXIDE TO FORMIC ACID IN A PRESSURIZZED FILTER PRESS CELL
2018
To limit the negative effect of carbon dioxide as a greenhouse gas, an interesting approach is the utilization of Carbon Capture and Conversion (CCC) methodology, which is focused on the use of CO2 waste as a feedstock to produce added-value product by using the excess electric energy from renewable source [1]. In this framework, an increasing attention has been devoted in the electrochemical conversion of carbon dioxide to formic acid in water [2,3], which is considered one of the more attractive pathway to convert CO2. Since the main hurdle of the CO2 reduction from aqueous solution is the low CO2 solubility in water, in this work, the effect of some operating parameters, including pressu…
Clinical microbeam radiation therapy with a compact source: specifications of the line-focus X-ray tube
2020
Highlights • Line-focus X-ray tubes are suitable for clinical microbeam radiation therapy (MRT). • A modular high-voltage supply safely enables high electron beam powers. • An electron accelerator was designed to generate an eccentric focal spot. • We simulated a peak-to-valley dose ratio above 20 for single-field MRT. • Microbeam arc therapy spares healthy brain tissue compared to single-field MRT.
Electrochemical treatment of wastewater contaminated by organics and containing chlorides: Effect of operative parameters on the abatement of organic…
2022
Abstract In the last years, large attention has been devoted to the electrochemical treatment of wastewater polluted by recalcitrant organics and containing chlorides. However, the utilization on an applicative scale of this route is limited by the fact that usually it is not possible to achieve high removals of organics without the generation of significant amounts of chlorinated by-products. Here, the role of several operative parameters on the performances of the process was systematically evaluated using phenol as a model organic pollutant. It was shown that the removal of phenol and TOC and the generation of many by-products including chlorophenols, chloroacetic acids, chlorate and per…
Ab initio calculations of Li2(Co, Mn)O8 solid solutions for rechargeable batteries
2019
The presented study has been financed via the Latvian Science Council Grant No. 2018/2-0083. The author is grateful to Professors M. R. Philpott, G. Ceder and G. Borstel for many stimulating discussions during his work at Singapore. We performed all our ab initio calculations at North German Parallel Computer Center located at Hannover (HLRN).
Reduction of oxygen to H2O2 at carbon felt cathode in undivided cells. Effect of the ratio between the anode and the cathode surfaces and of other op…
2019
Abstract In the last years, the electrochemical conversion of oxygen to hydrogen peroxide at carbon felt has been largely studied in order to define a new route for the production of H2O2 and to optimize the electro-Fenton process, which is based on the cathodic generation of H2O2. In particular, many studies regarding electro-Fenton process were carried out in undivided cells in order to avoid the costs of the separator and to reduce the cell potentials. Hence, in order to optimize the cathodic conversion of oxygen to H2O2 in undivided cells, the effect of many parameters linked to the anodic process were here evaluated. In particular, it was demonstrated that the performances of the proce…
Electrochemical Conversion of CO2 to HCOOH at Tin Cathode: Development of a Theoretical Model and Comparison with Experimental Results
2018
The electrochemical reduction of pressurized carbon dioxide at tin cathode is considered a very promising process for the production of formic acid. Here, the process was studied in an undivided cell with the aim of developing a simple theoretical model. First, a large series of polarization and electrolyses was performed in order to evaluate the kinetic of the process. According to the literature, experimental results can be described by a simple reaction mechanism, which involves the following key stages: (i) mass transfer of CO2 to the cathode; (i) its adsorption described by a Langmuir equation; (iii) the reduction of adsorbed CO2. A simple model was developed based on the cathodic conv…
A single-chamber membraneless microbial fuel cell exposed to air using Shewanella putrefaciens
2016
Abstract Microbial Fuel Cells (MFCs) are bio-electrochemical devices which convert the chemical energy content of organic fuels into electricity, thanks to the ability of anode respiring bacteria to give electrons to the anode. This result is usually achieved under anaerobic conditions, obtained with a sealed anode chamber. Despite this, Shewanella oneidensis has been recognized by many authors to obtain the same results in presence of air. Furthermore, another member of the Pseudomonaceae family, Shewanella putrefaciens, has also shown the capability to catalyze the cathodic oxygen reduction. In this work the capability of S. putrefaciens to work under both anaerobic and micro-aerobic cond…